MANUAL
5. Installation of the child seat
5.1.
This child seat can be used with the harness for children less than 13kg
in weight (group 0+), installed rearward-facing using ISOFIX anchorage.
Step 1: Place the ISOFIX base in car seat. Lift
the ISOFIX adjuster button up, the ISOFIX
attachment of both sides will stretch out. Latch
both of the ISOFIX attachments with the
corresponding ISOFIX lower anchorages
completely. Make sure the ISOFIX latching
indication shows GREEN. Then push the ISOFIX
base towards the car seat backrest until it
is firmly pressed against the car seat backrest.
Adjust the support leg to touch the ground
completely.
Step 2: Secure the backrest on the ISOFIX
base rearward-facing and adjust the child
seat to position 3.Meanwhile check to
make sure the the backrest is securely
latched with the ISOFIX base and the child
seat latching indication shows GREEN.
Step 3: Place your child into the child seat.
Check the height of the shoulder straps on the
correct position and fasten the buckle. Check
that the harness has not become twisted and
also check that the cover is not impeding the
movement or fit of the harness in any way .
To disassemble the child seat, repeat the
above prescribed procedures in reverse order.
IMPORTANT: Always adjust the child seat to
position 3 when using group 0+.
