8
MANUAL
WARNING
Executive standard:EN1273-2005 / ASTM F977-2012.
For the baby up 6 months and under 15 months.
Do not use until baby can sit unassisted.
Never leave child unattended. Always keep child in view while in walker.
Never lift the babywalker when the child is in it.
When use it as a rocker, do not turn it upside down or shake it acutely.
Never use near stair, steps or thresholds. Check that surfaces are flat and free of
objects that may cause tipping over either indoors or outdoors. To reduce chance
of the child slipping out of the seat, check that both feet of child touch the floor
and never carry the walker with the child in it.
To avoid burn injuries, keep the child away from ranges, radiators, space heaters,
fireplaces, etc.
Do not use walker near driveways, streets, swimming pools, or any other areas that
are not safe.
Discontinue using the walker when it is damaged or broken.
This walker is recommended for a child capable of sitting upright unassisted, 32
inches (81cm) tall or less, and weighing 26 pounds (12KGS) or less.
Use only for limited period of say 30 minutes at a time, this walker is not a training
aid and excessive use may impair the babys natural walking development.
Your baby walker frame may be cleaned using a damp cloth and normal domestic
detergent. Do not use abrasives or bleach, if you should remove the seat from the
walker for any reason, ensure that it is properly refitted and that all hooks and studs
are properly engaged.
Your walker needs regular checking for safety and performance. Ensure there is no
damage, that the height adjustment is properly locked and the castors operate
smoothly.
Adult assembly is necessary.
keep away from fire.
Non-rechargeable batteries are not to be charged.
Different types of batteries are not to be mixed.
Only batteries of the same or equivalent type as recommended are to be used
rechargeable batteries are to be removed from the toy before being charged (if
removable)
rechargeable batteries are only to be charged under adult supervision.
batteries are to be inserted with the correct polarity.
Empty batteries are to be romoved from the toy. The supply terminals are not to
be short-circuited.
