6
3.2Display Interface Introduction
11-CH1 Parameters
12- CH2 Parameters
13-Wave Display
14-Current Channel Output State
15-Function list ofSoftkey
16-Phase angle between CH1 and CH2
3.3 Button function Introduction
name
Introduction
Function softkey
Function softkey can activate the corresponding function on the screen
Enter main interface, or set waveform of currentchannel
Fast switch between measurement mode interface and main interface
Fast switch betweenmodulation mode interface and main interface
Fast switch between system setting interface and main interface
In main interface, press it to control output of CH1 and CH2 in the same time; in
modulation mode interface, press it to control ON/OFF
When setting parameter
，
press it to move cursor to set step value.
Press it to enter CH1 channel, and press it again to control output of CH1, You can keep
pressing for more than 1sto set CH1 into theprimary channel.
Press it to enter CH2 channel, and press it again to control output of CH2, you can keep
pressing for more than 1s to set CH2 into the primary channel.
