设备使用说明书
第
21
页 共
23
页
Figure 8.20 – Turning on the display of the VSWR limit line on the Smh, Pol charts and SWR plot
8.8.4. To change the display value of the level of the VSWR limit line, click on the numerical value
Value
, and
in the appeared submenu (Figure 9.21), enter a numeric value in the range from 1.01 to 9.00.
Figure 8.21 – Entering the numerical value of the displayed SWR limit line
8.8.5. Enter the numerical value of the coefficient and press
or
Enter
. To delete erroneous or previously
entered values, press
×
or
Del
. To refuse to enter a value, click
˂
or
Cancel
.
In our example, in figure 8.21, we
enter the numerical value of the displayed VSWR limit line of the value on the charts.
Note
– If the coefficient value entered by the user is outside the working range (1.01 - 9.00), a corresponding
warning is displayed on the device screen.
