PDP pixel test
The PDP pixel test checks the status of the PDP, with regard to the number of defective pixels
The test is used:
- before transporting the product or the PDP to a workshop
- before and after service on the PDP
When the PDP is fitted an aluminium front frame, point the NN remote control at
the hole in the left-hand front bottom side of the PDP. See
6.
By means of a thin tool press in the holes FD the FE and then FF on the NN remote
control.
For other operations point the NN remote in the same way.
-
Refer to illustrations for:
- Placement of black self-adhesive tape on the PDP.
- Placement of buttons on NN remote control.
-
Remove the black self-adhesive tape on the PDP. See
4.
-
Switch on the PDP.
-
Enter service mode, CAT Panel menu.
Press and hold button
“B”
and at the same time press button
“C”
3 times within
1 second. See
4 and
5.
-
Select Aging.
Place the cursor on IIC Mode and press
“OK”
.
Select “Aging”, use the up/down arrow buttons to step through the pictures on
the on-screen-display.
Press
“OK”
to activate the internal test pictures.
Press
“OK”
to switch between the different test pictures.
-
PDP pixel test.
Use the “GREEN”, “RED” and “BLUE” test picture for checking the pixels.
-
Exit service mode.
Press
“R”
twice to return to CAT Panel menu.
Press
“C”
to exit the service mode.
LED
4
5
+
+
_
VOL
R
B
C
OK
R
PDP pixel test, English 1.9
6
FD
FE
FF