R E M O T E C O N T R O L
Operation for the Beovision Contour is described with Beoremote One.
Pair your remote control
Note that to operate your Beovision Contour, it must first be paired with Beoremote One. Long press the
PAIRING button placed on the back of the right speaker box or pair through the
Service
menu found when
you select the Bang & Olufsen TV App in the home menu and select
Sound & BeoLink...
. Remember to set
your remote control in pairing mode before pairing.
1.
Connect the television to the mains.
2.
Put in fresh batteries in your remote control and place yourself in front of the product.
3.
After timeout of a welcome screen in the display, use or and the centre button to set the
preferred language.
4.
If the product is opened for pairing, pairing takes place.
Pair via the menu...
1.
Press
to bring up the Home menu.
2.
Use the arrow buttons to select the
Bang & Olufsen TV app
and press the centre button.
3.
Press or to select
Sound & BeoLink...
and press the centre button.
4.
Press or to select
Service
and press the button.
5.
Press or to select
Remote control pairing
and press the centre button.
Follow on-screen instructions to pair your remote control.
Both the Beovision Contour and the remote control must be in pairing mode to be able to pair the two
products.
When you receive Beoremote One together with your Beovision Contour, you set it in pairing mode during
first time setup of the remote control. If your Beoremote One for some reason is no longer paired to the
Beovision Contour and you need to pair it again, or if you cannot find it and you need to pair another
