Surround sound and Home cinema
You can extend your television into a
surround sound television by adding
Bang & Olufsen loudspeakers and up
to two BeoLab 2 subwoofers.
When you switch on one of the
sources, speakers in a surround
sound television can be cut in or out,
depending on what kind of sound
suits the source you are using.
If you connect a projector, you can
turn your television into a Home
cinema. When you switch to the
Home cinema setup, the television
switches the picture from a monitor
to the projector screen and activates
the appropriate speakers.
For further information about how to
connect speakers to the television,
refer to the chapter
‘Set up the
television’
on page 1 in the
Reference book.
You can select the speaker combination that
suits the source you are using, provided that
the various speaker modes are available in
your television.
> Press to bring up the Scene display on Beo5,
then press
Speaker
to bring up the Speaker
display on Beo5. (Beo4: Press
LIST
repeatedly to
display SPEAKER).
> Press
Optimise
if you want to optimise the
sound, or press
Mode 1 – 5
to select the
speaker combination you want. The selected
speakers cut in automatically. (Beo4: Press
GO
or
1
–
5
).
> Press
to remove the Speaker display from the
Beo5 screen and return to the source you were
using. (Beo4: Press
EXIT
).
Speaker combinations
SPEAKER 1
… Sound in the centre speaker only.
SPEAKER 2
… Stereo sound in the front speakers.
Subwoofers are active.
SPEAKER 3
… The centre speaker, front speakers
and subwoofers are active.
SPEAKER 4
… The front speakers, surround
speakers, and subwoofers are active.
SPEAKER 5
… Surround sound from all speakers
and subwoofers.
If you have added only two front speakers to the
television, you will only be able to choose
SPEAKER 1–3.
Select speakers for movie sound
12