background image

46

Maintenance of your television 

Regular maintenance, such as

cleaning the television, is the

responsibility of the user. To achieve

the best result, follow the

instructions to the right. Contact

your Bang & Olufsen retailer to

determine recommendations for

regular maintenance. 

Any defective parts are covered by

the guarantee during the warranty

period. 

Cleaning cabinet surfaces

Wipe dust off the surfaces using a dry, soft

cloth. Remove grease stains or persistent dirt

with a soft, lint-free, firmly wrung cloth,

dipped in a solution of water containing only

a few drops of mild detergent, such as

washing-up liquid.

Never use alcohol or other solvents to clean

any part of the television! 

About the contrast screen 

To clean the picture screen, use a mild window

cleaning fluid. To retain the optimum

performance of the screen, make sure that no

streaks or traces of the cleaning fluid are left

on the screen. 

To avoid soiling the speaker cover when you

clean the television screen, we recommend

that you remove the speaker cover

beforehand. 

Speaker cover cleaning instructions…

> Dissolve 25 grams of detergent without optical

whitening/brightening and bleaching agent into

1 litre of hand warm water (40ºC). 

> Apply the soap solution onto the speaker cover

with a soft sponge. 

> The speaker cover must be soaked completely

with the soap solution. 

> Leave the soap solution on the speaker cover for

approximately half an hour and then rinse it

thoroughly under running water. 

> Let the speaker cover dry on a flat and plane

surface. Make sure the speaker cover is placed

front side down when drying. 

To remove the speaker cover: 

Gripping the top

corners of the cover with your fingers, push

inward on the screen with your thumbs until the

speaker cover clicks free of the screen. Repeat the

procedure with the lower corners of the cover, if

necessary. 

To mount the speaker cover: 

Gripping the

corners of the speaker cover frame with your

fingers, push it inward with your palms until the

speaker cover clicks into place. Check all the

contact points to ensure that the cover is securely

in place. 

NOTE! If the front screen glass should crack or chip,

or if it should be damaged in any way, it must be

replaced immediately, as it could otherwise cause

injury. You can order replacement front screen glass

from your Bang & Olufsen retailer. 

Downloaded from 

ManualsNet.com

 search engine

Summary of Contents for BeoVision 3





















































Reviews: