Bang & Olufsen BeoVision 3, Manual

Page: 20 / 52

20
You choose whether or not to
activate the pincode system. The
pincode system is deactivated when
you delete your pincode.
The pincode system is intended to
make normal use of your television
impossible for someone who does
not know the pincode.
When the television has been
disconnected from the mains for
15–30 minutes, the pincode system
goes into effect.
When reconnected and switched on,
the television automatically switches
itself off after five minutes. Entering
the pincode returns the television to
normal.
Should you lose or forget your code,
contact your Bang & Olufsen retailer
to receive a mastercode which
disables your pincode.
The pincode system
Activate the pincode system
NOTE! You can change your pincode up to five
times within a three-hour period.
Bring up the TV SETUP menu on the screen,
activate the PINCODE menu and choose from
the submenus.
PROGRAM GROUPS
TUNING
TIMER RECORDING
PLAY TIMER
OPTIONS
STAND POSITIONS
GROUP1
. . .
. . .
TV SETUP
back select
GO
PINCODE
PINCODE 0 . . .
CONFIRM PINCODE . . . .
next
accept
GO
To activate the pincode system…
> Press MENU to bring up the TV SETUP menu.
> Press
ss
twice, followed by STOP . The PINCODE
menu appears on the screen.
> Use the number buttons or
▲ ▼
on Beo4 to
enter the four digits of your code. Press
ss
to go
back to digits you wish to correct and use
▲
or
▼
to change them.
> Press GO after the last digit is found.
> Re-enter your code to confirm it and press GO
again. If the two codes are not identical, the
input fields are cleared and you must enter the
code again.
To change or delete your pincode…
> Press MENU to bring up the TV SETUP menu.
> Press
ss
twice, followed by STOP . The PINCODE
menu appears on the screen.
> Enter the correct pincode to be able to change
or delete pincode functions.
> To change your code, enter the code digits using
the number buttons or
▲ ▼
and press GO .
Re-enter the code to confirm it.
> To delete your code, choose DELETE PINCODE
and press GO .
To cancel a pincode entry…
> Press STOP . The entry is cancelled and the input
fields are cleared.
PROGRAM GROUPS
TUNING
TIMER RECORDING
PLAY TIMER
OPTIONS
STAND POSITIONS
GROUP1
. . .
. . .
TV SETUP
back select
GO
PINCODE
DELETE PINCODE
NEW PINCODE
select
GO
Downloaded from ManualsNet.com search engine