In
st
al
la
tio
n
an
d
se
tt
in
g
up
Speaker setup
Set up the speakers to optimise sound from your
listening position.
First-time setup of loudspeakers applies only to speakers for TV viewing.
See the Guide for further information.
Adjust volume, bass, treble and loudness and preset two default speaker
combinations. Select a different speaker combination at any time.
NOTE! If you have other equipment connected to
your television, set POWER SAVING to OFF. See
the Guide for further information.
Calibration
2
*Speaker settings
You need to calibrate the stand before you can use the motorised
movement of the stand.
The menus SPEAKER DISTANCE and SPEAKER LEVEL are only available on
BeoVision 10-40/46.
Calibrate the stand
Set the maximum angle the TV will turn – left and
right. The motorised movement of the TV will not
work until the calibration process has been
completed. You can only tilt the TV manually.
At ‘SET LEFTMOST
POSITION’ turn left to the
point you wish to restrict
the movement to
At ‘SET RIGHTMOST
POSITION’ turn right to the
point you wish to restrict the
movement to
Accept
Set preferred preset position for the TV to turn to,
when it is switched on and off.
Set stand positions
SPEAKER TYPE
SPEAKER DISTANCE*
2
SPEAKER LEVEL*
2
ADJUSTMENT
STAND POSITIONS
STAND ADJUSTMENT
19
