Connection 4
Example of a full installation setup
This example shows the connection principles in a full installation setup (not all components are necessary, e.g. ML Gateway):
Connection
3GDBNMMDBSHNMADSVDDM!DN2NTMC$MBNQD@MCSGD-HMJQNTSDQB@MADDRS@AKHRGDCUH@SGQDDCHEEDQDMSV@XR
- a wired ethernet connection (Local Area Network connection - LAN), and/or
@VHQDCBNMMDBSHNMUH@@/NVDQKHMDDSGDQMDS@C@OSDQMNSDWOK@HMDCHMSGHRFTHCD@MCNQ
- a wireless ethernet connection (Wireless Local Area Network connection - WLAN at 5 GHz)
A wired connection is strongly recommended by Bang & Olufsen.
3GDRSNQ@FDVGDQDSGDBTRSNLDQiRCHFHS@KBNMSDMS@TCHNÖKDRHROK@BDCL@XOGXRHB@KKXADDHSGDQ
- a Network Attached Storage (NAS), or
- a BeoMaster 5 from an existing BeoSound 5 setup. In this case the BeoMaster 5 will act as a Network Attached Storage (NAS).
From this point, the installer must choose the connection type to be used in the setup to continue the installation. Click the link below:
Wired connection (LAN)
Wireless connection (WLAN)
Bang & Olufsen
Internet
Radio/CD
BeoSound 5
Master Link
Power/USB/DVI
Video master
Audio/Video
ISP router
(192.168.1.1)
Client PC/MAC
BeoMaster 5
BeoSound 5 Encore
BeoSound 5 Encore
Network Link router
(192.168.100.1)
ML Gateway
Main room
Link room
Link room
Technical control room
NAS
Home
Automation
System
Optional
(192.168.1.10)
(192.168.100.X)
(192.168.1.X)
Client PC/MAC
(192.168.100.X)
(192.168.1.X)
existing network
Network Link
Ethernet switch
IP addresses are only examples