background image

How to use the pincode system 

The use of a pincode means that if 

your music system has been 

disconnected from the mains for 

more than approximately 30 minutes, 

it can only be activated again by 

switching it on and keying in your 

pincode via the close-up operation 

panel. 

If the pincode is not entered, the 

music system automatically switches 

to standby after approximately three 

minutes. 

You can change your pincode, but it 

is only possible to change it five times 

within a period of three hours. 

You choose whether or not to 

activate the pincode system. The 

pincode system is deactivated when 

you delete your pincode. 

What’s on the PINCODE SETUP menu

 

NEW PINCODE …

 Use this menu to enter or 

change your pincode. 

DELETE PINCODE …

 Use this menu to deactivate 

the pincode system. 

To open for Mastercode input

 

> While the music system asks for your pincode, 

press and hold   to open for Mastercode input. 

> Enter the Mastercode. 

> Once you have entered the Mastercode, the pin-

code system is disabled and the music system is 

ready for use. To activate the pincode system 

again, you must enter a new pincode. 

Useful hints

 

If you enter a wrong pincode, you get four more 

attempts to key in the code, after which the music 

system switches off and cannot be switched on 

again for three hours. 

If UNLOCK SYSTEM appears in the display the fi rst 

time you activate a function, and you have not 

received a PIN code from your Bang & Olufsen 

retailer, contact your retailer to receive a PIN code 

before proceeding. 

Should you forget your pincode, please contact 

your Bang & Olufsen retailer who will assist you in 

getting a Mastercode from Bang & Olufsen. You 

need the Mastercode to reactivate your music 

system. 

20

To call up the pincode menu, press MENU and 

then press 

l

 twice followed by STOP. 

PINCODE SETUP

 

… 

1 NEW 

PINCODE 

2 DELETE 

PINCODE 

Summary of Contents for BeoSound 4

































Reviews: