Bang & Olufsen BeoSound 3, Manual

Page: 12 / 20

Placement, connections and maintenance
Placement
Your music system is designed for indoor use in dry, domestic
environments only, and for use within a temperature range of 0–40˚ C
(32–105˚ F) and a relative humidity range of 25–75%. Make sure that the
system is always placed on a firm, stable surface when not hanging from
the enclosed wall bracket. Avoid placing the system in direct sunlight,
near radiators or other sources of heat.
Fastening the wall bracket
Use the correct size and type of screws and wall anchors – taking into
account the condition of the wall.
Use three screws and wall anchors each with a minimum load rating of
3.5 kg (7 lbs.).
Special notice about light partition walls
If you intend to hang BeoSound 3 on a gypsum wall (also known as
drywall or wallboard), at least one of the three screws must be a lag
screw (5 mm – 0.2"), which penetrates the gypsum and is screwed a
minimum of 25 mm (1") into a vertical stud.
12
NOTE! Counter-sunk screws must
not be used.