background image

10

Configuration of BeoPort 

Make your settings and 

adjustments for BeoPort in the 

Configuration menu

*. 

This chapter tells you what to do, 

to be able to watch PC TV, 

including how to make the correct 

Option 

number setting. 

In addition, the 

Configuration 

menu

 contains a variety of choices 

which, depending on your specific 

setup, may be necessary to 

consider. Therefore, we urge you 

to click through the ‘Configuration 

menu’ and refer to the instructions 

in the 

On-Screen Guide

 for 

additional information. 

Once you have initially configured 

BeoPort, you are prompted to 

register, as described on the 

opposite page. 

*NOTE! The 

BeoPort Configuration menu 

appears automatically when you install 

BeoPort. To access this menu

 

at a later date, 

select CONFIG under SETUP on the control bar. 

To access the 

On-Screen Guide

, select GUIDE 

in the control bar. 

Auto-tuning 

Before you auto-tune TV channels for your 

TV tuner card, make sure that the correct 

broadcast system is displayed under ‘Video 

System’, that you have indicated whether 

your connection is via cable or antenna, 

and that the correct country is displayed. 

Remember that to receive a transmission, 

antenna or cable must be connected directly to 

your PC. 

From the ‘BeoPort Configuration’ menu… 

> Click the 

Tune

 tab to be able to tune and 

make presets. 

> Click 

AutoTune

 to start auto-tuning TV 

channels. 

During the tuning sequence, the located 

channels are shown in the display. At any time, 

you can stop the tuning and the channels 

already found will be stored. 

Manual tuning 

If you want to tune in a channel manually, 

perhaps because it was not found during 

auto-tuning, go to the section 

Manual

 in 

the 

Tune

 menu. 

> In the section 

Manual

, use the small arrows 

to click through the channels. 

> When you have found the channel you want 

to add, click 

Add

On the TV tuner cards, the TV channels you 

tune in are registered as program numbers and 

channels. Please note that not all TV tuner 

cards observe standard channel numbers for 

TV channels. 

The ‘Tune’ tab in the Configuration menu. 

The ‘Advanced’ tab in the Configuration menu. 

Summary of Contents for BeoPort

















Reviews: