3
B E O L I N K S Y S T E M
↑
The main room
The link room
→
This guide describes how to in-
stall your BeoLink Passive kit in
a BeoLink (Master Link) distri-
bution system.
The User’s guide, which is also
supplied with the BeoLink
Passive kit, describes how to
operate the system once it has
been installed.
The BeoLink distribution system
enables you to control your
main system and to listen to it
in the link room. Your link room
must be connected to the main
room via a Master Link cable.
To join the Master Link cables
from the main system and from
the BeoLink Passive kit, a junc-
tion box is required.
The cable and box (and other
accessories) can be purchased
at your Bang & Olufsen dealer.
The main room is the room in
which you have placed your
audio system and/or video sys-
tem (the main system).
The link room is where you are
about to install your BeoLink
Passive kit.
When you set up your BeoLink
Passive, we recommend the
following sequence:
1 Switch off your Bang & Oluf-
sen system and disconnect the
products from the mains.
2 Make the installation as de-
scribed in this guide.
3 Connect the entire system to
the mains.
We recommend that you follow
the instructions in this guide
carefully. If you have never
carried out cable installations
before, we suggest you leave it
to your Bang & Olufsen dealer.
Contents
4 Placement
6 Connections
8 Ready for use…
9 Maintenance
10 International guarantee
Setting-up guide
