background image

2

For the Canadian market only:
This class B digital apparatus meets all require-
ments of the Canadian Interference-Causing
Equipment Regulations.

For the US-market only!
NOTE: This equipment has been tested and
found to comply with the limits for a class B
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful inter-
ference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not in-
stalled and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the
user is encouraged to try to correct the inter-
ference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equip-

ment and receiver.

– Connect the equipment into an outlet on a

circuit different from that to which the
receiver is connected.

– Consult the dealer or an experienced radio/

TV technician for help.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: To reduce the risk of
electric shock, do not remove
cover (or back).
No User-serviceable parts
inside. Refer servicing to
qualified service personnel.

WARNING: To prevent fire or electric
shock, do not expose this appliance to
rain or moisture.

This symbol indicates that a
dangerous voltage constitut-
ing a risk of electric shock is
present within this unit.

This symbol indicates that
there are important operating
and maintenance instructions
in the literature
accompanying this unit.

Summary of Contents for BeoLink Passive













Reviews: