background image

Waste Electrical and Electronic Equipment 
(WEEE) – Environmental protection 

Electrical and electronic equipment, parts and 
batteries marked with this symbol must not be 
disposed of with normal household wastage; 
all electrical and electronic equipment, parts 
and batteries must be collected and disposed 
of separately. When disposing of electrical and 
electronic equipment and batteries by use of 
the collection systems available in your country, 
you protect the environment, human health 
and contribute to the prudent and rational use 
of natural resources. Collecting electrical and 

electronic equipment, batteries and waste 
prevents the potential contamination of nature 
with the hazardous substances which may be 
present in electrical and electronic products 
and equipment.

Your Bang & Olufsen retailer will advise you of 

the correct way of disposal in your country. 

If a product is too small to be marked with the 
symbol, it will appear in the User Guide, on the 

Guarantee certificate, or on the packaging. 

10

Technical specifications, features and the 

use thereof are subject to change without 
notice.

3507912

  

Version 1.0

     

1211

 

Summary of Contents for BeoLab 9













Reviews: