To fasten the loudspeaker
Here is explained how to fasten the
loud speaker to a Bang & Olufsen
stand.
a
Remove the two small covers (if
any) on the stand. Press each
cover as shown, and they will
come loose.
b
Fasten the bracket to the stand.
Use the four longest screws
(M5 × 25 mm).
c
Fasten the loudspeaker to the
bracket. Use the two short screws
(M5 × 8 mm). However, do not
fully tighten the screws before
you have made the adjustments
mentioned below (
d
).
Adjustments:
First, make sure that
the television is adjusted to a level
position on its stand! Then use the
two screws (
d
) to adjust the loud
speaker so that it is parallel to the
lower edge of the television. Align
the loud speaker front with the tele
vision and tighten the two screws
(
c
).
b
c
c
d
d
c
c
a
5
Summary of Contents for BeoLab 7-6
Page 1: ...BeoLab 7 6 Guide ...
Page 11: ......
