Adapt the loudspeakers to your setup
The loudspeakers may be placed
almost anywhere in your room.
However, the most natural
sound is obtained if they are set
up as explained on these pages.
SETUP switch
This switch has three settings: LEFT,
RIGHT and LINE.
Set the switch to LEFT or RIGHT
when connecting the loud speakers
in a Bang & Olufsen system. Set
the switch to LINE when
connecting the loud speakers in a
non–Bang & Olufsen system.
…To a Bang & Olufsen system:
Use the enclosed Power Link cables
to connect the loud speakers to your
system. Set the SETUP switch to
LEFT and RIGHT (the left and right
sound channel) respectively.
…To a non-Bang & Olufsen
system:
Use a special adaptor with an
ordinary phono/RCA plug in one
end, and a DIN-plug in the other.
Depending on your setup, you may
also need to connect an adaptor
with phono/RCA and mini jack
plugs (optional accessories, available
from your Bang & Olufsen retailer).
Set the SETUP switch to LINE.
The POSITION switch
When a loud speaker is placed in a
corner or close to a wall, the bass
level is boosted compared to the
bass level from a loud speaker placed
in a more free-standing position.
To remove this excessive bass boost,
set the POSITION switch to ensure
that the bass level suits the
placement of the loud speaker. The
appropriate switch setting depends
on the distance from the loud-
speaker to the walls and corners of
the room. Use the guidelines
mentioned here, when deciding
which of the three POSITION
switch settings to select – on each
loudspeaker.
The position zones, shown on the
next page, are meant as guide lines
– you may, of course, set the switch
to any of the three settings you
prefer.
6
