Cable connections
The loudspeakers can be used
with Bang & Olufsen audio,
video and link systems. They may
also be used with nonBang &
Olufsen systems. For specific
information about the sockets on
your system, refer to the Guide
enclosed with the system.
The socket panel is located at the
bottom of the loud speakers.
Power Link connections:
These
connections carry both the right
and left sound signals. Therefore,
you can:
1
run a Power Link cable from your
Bang & Olufsen system directly
to each loud speaker, or…
2
run a Power Link cable from your
Bang & Olufsen system to the
first loud speaker, and then run
another Power Link cable to the
next loud speaker. This will often
help to minimise cable clutter.
For safety reasons you must run
the cables to and from the loud
speaker through the cable guides.
Mains cord:
The supplied mains
cord and plug are specially designed
for the product. If you change the
plug or damage the mains cord, you
must buy another from your Bang &
Olufsen retailer!
LEFT RIGHT LINE
1 POWER LINK 2
SETUP
CORNER WALL FREE
POSITION
POWER LINK
POWER LINK
LEFT
RIGHT
1
LEFT
RIGHT
2
5
Connection to the
mains supply
SETUP switch
POWER LINK
socket
POSITION switch
