7
Connection to non-Bang & Olufsen products
The phono socket marked LINE
must be used instead of the
Power Link sockets if the Beo-
Lab 4000 is to be connected to
a non-Bang & Olufsen product
(using e.g. a cable, part no.
6270595). The signal must be
on a regulated low-voltage
level.
Connect one speaker to each
of the sound channels.
The switch marked LINE • L • R
must in this case be set to LINE.
Connection to the mains
Connect the enclosed mains
cord socket marked
~
on the
BeoLab 4000, but do not con-
nect it to the wall socket yet.
POWER
1 2
LINK
LINE
L
R
For safety reasons fasten the
mains lead behind the small
peg, before running it out from
the socket compartment.