1.2 Warnings – PIN code protection, English
STATIC ELECTRICITY
MAY DESTROY THE
PRODUCT
Warnings
ESD
When electrical replacements or disassembly is taking place use an ESD-mat. The
internal electronic are very sensitive to static electricity.
General warnings
Wear cotton gloves to avoid any fingerprints on the product.
The surfaces on the product is very sensitive, so handling should be done with
great care to avoid damage.
Cleaning of the speaker surfaces should only be done a lint-free cloth, which you
have dipped in lukewarm water and wrung firmly.
When doing disassembly small aluminum chips can occur when screws are
removed. Make sure all these small aluminum chips are removed from the speaker
cabinet before assembly is done. These aluminum chips can resolve in internal
shortcuts, and damage the Main chassis badly, if not removed.
If the speaker needs to be transported, a product cover can be ordered from B&O
(ordrenr. can be found in the back of this guide)
Summary of Contents for BeoLab 3 6881
