Bang & Olufsen BeoLab 17, Service Manual

Page: 48 / 72

4.20 Replacement of modules
Replace 82.1, Wireless Antenna
☞
4.2 Remove cover
☞
4.3 BeoLab 17 in service position 1
- Remove screws and pull off 82.1, Wireless
Antenna
☞
4.14 Remove PCB30, Digital Sound Engine
☞
4.19 Remove PCB89, Wireless Power Link Rx
- Follow the wire from 82.1, Wireless Antenna
through the ferrite core and disconnect the wire
on PCB89, Wireless Power Link Rx
! Remember to use the special tool, Extraction
jig, U.FL series, see page 4.24
- Gently pull out the wire through the ferrite core
and replace 82.1, Wireless Antenna
2x
TX10
10mm
Antenna wire