Bang & Olufsen beolab 12, User Manual

Page: 4 / 8

Set up the loudspeakers
We recommend that you follow
this procedure:
– Disconnect your system from the
mains supply.
– Place the loudspeakers according
to the guidelines in ‘ Connections
and settings ’, see page 6. For
information on how to fasten
the loudspeakers to the optional
accessory, refer to the guide
enclosed with the accessory.
– Set the switches to the correct
settings. This is explained in
‘ Connections and settings ’,
see pages 5–6.
– Connect your speaker system.
– Connect the entire system to the
mains supply again.
Cautions
– Make sure that the loudspeakers
are placed and connected in
accordance with the instructions
in this Guide. To prevent injury,
use Bang & Olufsen approved
wall brackets only!
– The loudspeakers can only be
switched off completely by
disconnecting them from the
mains supply.
– Do not expose this equipment to
dripping or splashing and ensure
that no objects filled with liquids,
such as vases, are placed on the
equipment.
– No naked flame sources, such as
lighted candles should be placed
on the apparatus.
– The loudspeakers are intended
for indoor use in dry, domestic
environments only, and for use
within a temperature range of
10–40º C (50–105º F).
– Remember that all loudspeakers
in a setup must be connected to
a mains outlet, and that they are
designed to be connected to the
mains at all times, as this allows
them to switch on automatically.
– Do not attempt to open the loud-
speaker. Leave such operations to
qualified service personnel!
– The supplied mains cord and
plug are specially designed for
the product. If you change the
plug or damage the mains cord,
you must buy another from your
Bang & Olufsen retailer!
4
The product identification label is
placed on the rear part of the
loudspeaker.