Bang & Olufsen BEOLAB 11, Manual

Page: 4 / 12

Set up the subwoofer
We recommend that you follow
this procedure:
– Disconnect your system from the
mains supply.
– Place the subwoofer according to
the guidelines in ‘ Adapt the
subwoofer to your setup ’ (p. 8).
For information on how to fasten
the subwoofer to the optional
accessories, refer to the Guide
enclosed with the accessory.
– Set the switches to the correct
settings. This is explained in
‘ Adapt the subwoofer to your
setup’
(pp. 8–9).
– Connect your speaker system as
described in ‘ Connect your
speaker system ’ (pp. 6–7) .
– Connect the entire system to the
mains again.
Cautions
– Make sure that the subwoofer is
placed and connected in
accordance with the instructions
in this Guide. To prevent injury,
use Bang & Olufsen approved
stands and wall brackets only!
– The subwoofer can only be
switched off completely by
disconnecting it from the wall
socket.
– Do not obstruct the gap between
the subwoofer units.
– The subwoofer is designed for
indoor use in dry, domestic
environments only, and for use
within a temperature range of
10–40º C (50–105º F).
– Remember that all speakers in a
setup must be connected to a
mains outlet, and that they are
designed to be connected to the
mains at all times, as this allows
them to switch on automatically.
– Do not attempt to open the
subwoofer. Leave such operations
to qualified service personnel!
4
Location of the product
identification label.
Leave it to qualified personnel to
remove the shell as the subwoofer
may be damaged in the process.