background image

This product fulfils the conditions stated in the

EEU directives 89/336 and 73/23.

Visit us at: http://www.bang-olufsen.com

3506254

0999

Printed in Denmark by

Bogtrykkergården a-s, Struer

NOTE: This equipment has been tested and

found to comply with the limits for a class B

digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful interfer-

ence in a residential installation.

This equipment generates, uses and can radiate

radio frequency energy and, if not installed and

used in accordance with the instructions, may

cause harmful interference to radio communica-

tions. However, there is no guarantee that

interference will not occur in a particular instal-

lation. If this equipment does cause harmful

interference to radio or television reception,

which can be determined by turning the equip-

ment off and on, the user is encouraged to try

to correct the interference by one or more of

the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equip-

ment and receiver.

– Connect the equipment into an outlet on a

circuit different from that to which the

receiver is connected.

– Consult the dealer or an experienced radio/

TV technician for help.

Summary of Contents for BeoLab 1













Reviews: