ACCESSORIES
THE TABLE BASE
The table base has 4 rubber feet. Each
foot can be tipped up which allows
the cord to be led out in the direction
of your choice.
The cover plate can be tilted to rest
on the tabletop. Under the cover
plate there is a note pad and a
directory for your stored phone
numbers.
PLACEMENT AND CLEANING
Do not place the telephone in very
dusty or dirty surroundings. Do not
expose it to excessive moisture.
Clean the telephone with a soft,
damp cloth dipped in water mixed
with a few drops of mild detergent.
TECHNICAL SPECIFICATIONS
Power supply
from the telephone
network
Ambient temperatures -25
o
C - +55
o
C
Relative humidity
15% - 95%
Visit our website on:
www.bang-olufsen.com
3500727
0301
Version 1.0
INDUSTRY CANADA WARNINGS
Notice:
The Industry Canada Label identifies certified
equipment. This certification means that the
equipment meets telecommunications
network protective, operational and safety
requirements as prescribed in the
appropriate Terminal Equipment Technical
Requirements document(s). The Department
does not guarantee the equipment will
operate to the user’s satisfaction.
Before installing this equipment, users
should ensure that it is permissible to be
connected to the facilities of the local
telecommunications company. The
equipment must also be installed using an
acceptable method of connection. The
customer should be aware that compliance
with the above conditions may not prevent
degradation of service in some situations.
Repairs to certified equipment should be
coordinated by a representative designated
by the supplier. Any repairs or alterations
made by the user to this equipment, or
equipment malfunctions, may give the
telecommunications company cause to
request the user to disconnect the
equipment.
Users should ensure for their own protection
that the electrical ground connections of the
power utility, telephone lines and internal
metallic water pipe system, if present, are
connected together. This precaution may be
particularly important in rural areas.
Caution:
Users should not attempt to make
such connections themselves, but should
contact the appropriate electric inspection
authority, or electrician, as appropriate.
Notice:
The Ringer Equivalence Number
(REN) assigned to each terminal device
provides an indication of the maximum
number of terminals allowed to be
connected to a telephone interface. The
termination on an interface may consist of
any combination of devices subject only to
the requirement that the sum of the Ringer
Equivalence Number of all the devices does
not exceed 5.
If you have any doubts or questions
concerning the telephone, please do not
hesitate to contact your retailer.
Hearing aid Compatibility:
This telephone
IS HEARING AID COMPATIBLE
BeoCom 1401
