ACCESSORY
THE TABLE BASE
The table base has 4 rubber feet. Each
foot can be tipped up to allow the
cord to be led out in the direction of
your choice.
The cover plate can be tilted to rest
on the tabletop. Under the cover
plate, the writing pad and directory
for your code numbers are placed.
PLACEMENT AND CLEANING
Do not place the telephone in very
dusty or dirty surroundings. Do not
expose it to excessive moisture.
Clean the telephone with a firmly
wrung, soft cloth dipped in water
containing a few drops of mild
detergent.
TECHNICAL SPECIFICATIONS
Network
analogue (PSTN)
Power supply
from the telephone
network
Ambient temperatures -25
o
C – +55
o
C
Relative humidity
15% - 95%
Supplier code
N909
BeoCom 1401 is intended for use on public,
analogue telephone networks.
Optimum telephone performance can only be
expected in the country where your telephone
was bought, as legal requirements for approval
may vary from country to country.
If you have questions relating to the use of your
BeoCom 1401, please contact your local retailer
for further information.
Hereby Bang & Olufsen declares that BeoCom
1401 is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC.
Further information is available on the Internet
at:
www.telecom.bang-olufsen.com
Dear Customer!
We hope that you will enjoy using your
BeoCom 1401 from Bang & Olufsen.
Please let us know how you experience
your new telephone. A few words
about what has made an impression –
good or bad – may help us in our
constant efforts to make our products
even better.
Thank you!
Please write to:
Bang & Olufsen a/s
Customer Service
Peter Bangs Vej 15
DK-7600 Struer
Denmark
or fax to:
Bang & Olufsen
Customer Service
+45 97 85 39 11
or e-mail to:
Visit our website on the Internet:
www.bang-olufsen.com
BeoCom 1401
3507153
0301
