Bang & Olufsen BeoCom 1, User Manual, Page: 57 / 68

57
The Advanced settings menu options
Handset… The Handset menu contains three sub-menus:
– Change name allows you to give the handset a new name using the
wheel and OK keys. Note that this menu is called Enter name until you
have entered a name for the handset.
– Register allows you to register the handset to the BeoLine base.
Provided the base has been opened for registration as described below,
registration occurs automatically when you select Register .
– Handset type allows you to set the handset to be Personal or Common ,
as described on page 49.
Base… The Base menu contains three sub-menus:
– Remove handset cancels registration of the handset to the base.
– Open base for registration opens the BeoLine base for registration of
handsets. You can also open the base manually, as described on page
8. You can then register the handset to the base, as described above.
– Change pincode allows you to enter a new pincode for your base and
change the pincode. Use the number keys to enter the pincode and the
OK key to store it. The default pincode is 0000.
Flash time… The correct flash time depends on how you have connected
your phone. Choose Long (450 milliseconds), Short (270 milliseconds)
or a custom value with the wheel.
Auto off-hook… Switch Auto off-hook to On if you want your phone to
answer a call as soon as you lift the handset from the charger. Auto
off-hook is set to Off when you purchase the phone. Auto off-hook can
only be used if the handset is placed in the charger. If the handset is
not placed in the charger, you must always press to answer a call.
Language… You can select the language of the display texts.
Phone lines… BeoCom 1 is a two-line telephone, but can be set for use
with one line only. Options are 1 and 2 .