Bang & Olufsen 1798, Service Manual

Page: 24 / 38

4.8 Adjustments
Restore the customer’s data in ML Gateway
If a defective PCB52, Digi module has
been replaced by a new module, the
new module is empty for
programmed data.
If reprogramming is necessary, it may
be an advantage to use the restore
function. This gives the oppertunity to
transfer back-up data from a certain
location into PCB52, Digi module.
- Navigate to Tools , Configuration
and refer to the
Load configuration
section.
- Click Browse... and choose
destination and configuration file.
Click Upload .
! When a configuration is uploaded, the uploaded project will not be activated
automatically (it will only replace the current EDIT version).
It is required to TEST and then SAVE the newly uploaded configuration in order to
activate it.
WWW.BEOWORLD.ORG