BW10-310A
Version 1.6 / 02-09-2022
Page 6
Bandwidth
10
, LTD
www.bandwidth10.com
4. Next click in the
wavelength select
section on the VCSEL wavelength / type you want to drive (i.e.
1550) and click
select
. Please check if the selected wavelength is correct.
At this stage you refine the max laser drive and tuning voltage limits to ensure that you do not
damage your specific laser. Just enter the limit in the
set LD Current section
and
set VT Voltage
section
and hit
set
. Note that the driver box uses an anode grounded configuration, i.e. the 1550 and
1654 voltage limits needs to be entered with a
“-“ sign. The limits can be found in the test document
sent with the laser.