Bandson 301519/20170209FZ002, User Manual

Page: 17 / 28

17
English
Alternatively, the weather station will attempt to receive a "DST" signal to syn -
chronise the time and date.
If no signal is received, press the "Wave +" and "Wave -" buttons simultaneously
to start the search for a "DST" signal manually.
8 Sunrise and sunset display
Press the “CITY” button on the rear side of the weather station. This will bring
you to Cities setting. Using “Wave +” and “Wave -” buttons you can select your
desired city out of more than 100 different cities worldwide.
To add a town or place manually, hold down the “CITY” button until the display
starts blinking. Now you can enter the abbreviation of the city using the “Wave
+” and “Wave -” buttons. Confirm the entry by pressing the “CITY” button. If the
abbreviation is set, you must subsequently set the time zone. Confirm the time
zone by using the “CITY” button, too
After that, you must set the longitude and latitude of your desired city.
When you complete these settings, the sunrise and sunset time of the entered
values will be displayed.
9 Moon phase
The main station has a "moon phase" function.
The current moon phase is shown automatically on the display of the weather
station.
10 Alarm function
Press the "MODE" button to set the alarm time. As soon as the alarm time is dis -
played , press the "MODE" button until the alarm time starts to blink. First set the
hour. You can set the desired alarm time using the "Wave +" and "Wave -" buttons.
Subsequently, set the minutes. Also use the "Wave +" and "Wave -" buttons for this
purpose. Press the "MODE" button. The alarm time is shown on the display. Now,
press the "Wave +"-button to turn on the alarm.