Bandson 301519/20170209FZ002, User Manual

Page: 16 / 28

16
English
If the weather station does not receive any signal within 7 minutes, place the main
unit and sensor unit closer to each another and press the “CH +” and the “CH
-” button in order to change the channels. Alternatively, press and hold the “CH”
button until an arrow appears in the display. Now the weather station connects
through all 3 channels.
7 Setting the time and date manually
To manually set the time, keep the "MODE" button on the rear side of the main
unit pressed.
You can make the desired settings using the "Wave +" and "Wave -" buttons.
Confirm your setting by pressing the "MODE" button.
Make the following settings one after the other:
1. 12/24 Hours
2. Temperature setting (°C or °F)
3. Time zone
4. Hours
5. Minutes
6. Year
7. Month
8. Day
9. Country (GE = Germany, EN = England, FR = France, IT = Italy, SP = Spain)
Display Meaning
always on
"DST" signal synchronised
blinking
"DST" signal is active
off
"DST" signal is inactive