B&R MAPPC700A-ENG, User Manual

Page: 168 / 524

168
Technical data • Individual components
Panel PC 700 with 945GME N270 CPU board User's Manual V 1.16
Driver support
In order for the CPU board with the Intel 945GME chipset to work properly, it is necessary to
install the Intel chipset driver (e.g. special USB driver) and the graphics chip. The necessary
software can be downloaded from the download area on the B&R homepage (
www.br-
automation.com ).
Features 5PC600.X945-00
Front side bus 533 MHz
Mass memory management 1x EIDE
Memory
Type
Size
Socket DDR2
Max. 2 GB
SO-DIMM 200-pin
Graphics
Controller
Memory
Color depth
Resolution
RGB
GE1
2)
= LVDS
Intel® Graphics Media Accelerator 950
Up to 224 MB (reserved from main memory)
Max 32 Bit
400 MHz RAMDAC, up to 2048 x 1536 @75 Hz (QXGA) including 1920 x 1080 @ >85 Hz (HDTV)
From 640 x 480 up to 1920 x 1200 (Embedded Panel Interface based on VESA EDID™ 1.3)
1) At max. specified ambient temperature: typically 58 ppm (5 seconds) - worst-case 220 ppm (19 seconds).
2) GE = Graphics Engine
Information:
Required drivers can only be downloaded from the B&R homepage, not from
manufacturers' pages.
Table 63: Technical data - CPU board X945 (Forts.)