B&R Automation PC 510 Page 138 User Manual Download

Page: 138 / 194

Software • Windows CE

138

Automation PC 510 User's Manual V 1.01

7.5 Requirements

The device must fulfill the following criteria to be able run the Windows CE operating system.

•

At least 128 MB main memory

•

At least one 128 MB CompactFlash card (size should be specified when ordered)

7.6 Installation

Windows CE is usually preinstalled at the B&R plant.

7.7 B&R Embedded OS Installer

The B&R Embedded OS Installer allows you to install existing B&R Windows CE images. The 4 files (NK.BIN,

BLDR, LOGOXRES.BMP, and LOGOQVGA.BMP) must be provided from an already functioning B&R Windows

CE installation.
The B&R Embedded OS Installer is available in the Downloads section of the B&R website (

www.br-

automation.com

). Further information is available in the online help for the B&R Embedded OS Installer.

Summary of Contents for Automation PC 510



































































































































































































Search results

Summary of Contents for Automation PC 510

Reviews:

Related manuals for Automation PC 510

Brands by name

Popular brands

B&R Automation PC 510, User Manual

Search results

Summary of Contents for Automation PC 510

Reviews:

Related manuals for Automation PC 510

Brands by name

Popular brands