Technical data
8LS...-3 user's manual V2.50
15
2.2.1 Example order 1
A three-phase synchronous motor of type
8LSA45
with a nominal speed of 3000 rpm was selected for an appli-
cation. Because of the construction, the cables can only be connected on the top of the motor ("top" connection
direction). The motor should also be equipped with a holding brake, a keyed shaft and a 32-line EnDat single-turn
encoder.
The code (ee) for the encoder system is
EA
.
The (nnn) code for a nominal speed of 3000 rpm is
030
.
The code (ff) for the other options (oil seal, holding brake, keyed shaft and connection direction) is
C3
.
The model number for the necessary motor is therefore
8LSA45.EA030C300-3
.
2.2.2 Example order 2
A three-phase synchronous motor of type
8LSA56
with a nominal speed of 4500 rpm was selected for an applica-
tion. Because of the construction, the cables can only be connected on the back of the motor (swivel connectors),
and must be as compact as possible, so the single-cable (hybrid) solution is desired. The motor should also be
equipped with a holding brake, a smooth shaft, an oil seal and a 32-line EnDat multi-turn encoder.
The code (ee) for the encoder system is
DB
.
The code (nnn) for a nominal speed of 4500 rpm is
045
.
The code (ff) for the other options (oil seal, holding brake, smooth shaft end and angled single-cable solution,
swivel connector) is
S8
.
The model number for the necessary motor is therefore
8LSA56.DB045S800-3
.
