B&R 5PC810.BX01-00 User Manual Download Page 289

Page: 289 / 428

Software • B&R Key Editor

Chapter 4 Software

Automation PC 810 with GM45 CPU board user's manual V1.28

289

12 B&R Key Editor

On display devices, it is often necessary to adapt the function keys and LEDs directly to the application software

being used. The B&R Key Editor makes it quick and easy to implement a unique configuration for the application.

Figure 157: Screenshots of the B&R Key Editor V3.30

Features:

•

Configuration of normal keyboard keys (A, B, C, etc.)

•

Keyboard shortcuts (CTRL+C, SHIFT+DEL, etc.) using only one key

•

Special key functions (change brightness, etc.)

•

Assigning functions to LEDs (HDD access, power, etc.)

•

4 assignments possible per key (using layers)

•

Configuration of the panel locking time when multiple Automation Panel 900 devices are connected to
Automation PC and Panel PC devices.

Supports the following systems (version 3.30):

•

Automation PC 510

•

Automation PC 511

•

Automation PC 620

•

Automation PC 810

•

Automation PC 820

•

Automation PC 910

•

Automation Panel 800

•

Automation Panel 830

•

Automation Panel 900

Summary of Contents for 5PC810.BX01-00













































































































































































































































































































































































































































Search results

Summary of Contents for 5PC810.BX01-00

Reviews:

B&R 5PC810.BX01-00, User Manual, Page: 289 / 428

Search results

Summary of Contents for 5PC810.BX01-00

Reviews: