B&R 5AP92D.1505-I00 User Manual Download

Page: 48 / 158

Technical data

Automation Panel 9xD - Hygienic design User's manual V 1.80

4.1.5.1.5 CFast slot

This CFast slot is internally connected to the chipset and implemented in version SATA II (SATA 3.0 Gbit/s).

Information:

5CFAST.0xxx-00 CFast cards are only permitted to be operated in the xPC2100 with revision E0 or later.

CFast slot

Connection

SATA 0

Order number

Short description

CFast cards

5CFAST.2048-00

CFast 2 GB SLC

5CFAST.4096-00

CFast 4 GB SLC

5CFAST.8192-00

CFast 8 GB SLC

5CFAST.016G-00

CFast 16 GB SLC

5CFAST.032G-00

CFast 32 GB SLC

5CFAST.032G-10

CFast 32 GB MLC

5CFAST.064G-10

CFast 64 GB MLC

5CFAST.128G-10

CFast 128 GB MLC

5CFAST.256G-10

CFast 256 GB MLC

Warning!

CFast cards are only permitted to be connected and disconnected in a voltage-free state!

4.1.5.1.6 Power and reset buttons

Both buttons can be pressed without any tools.

Description

Power button

The power button offers full ATX power supply support and has various configurable functions.

•

Short press:

Switches the PC on or off or performs the action configured in the operating system when pressing the power button (shutdown, sleep,

etc.).

•

Long press (approx. 4 s)

: The ATX power supply switches off the PC without shutting it down.

Pressing the power button does not reset the MTCX processor.

Reset button

Pressing the reset button triggers a hardware/PCI reset. The PC is restarted.

During a reset, the MTCX processor is not reset.

Warning!

Switching off the power without shutting down or resetting the system can result in data loss!

Summary of Contents for 5AP92D.1505-I00































































































































































Search results

Summary of Contents for 5AP92D.1505-I00

Reviews:

Related manuals for 5AP92D.1505-I00

Brands by name

Popular brands

B&R 5AP92D.1505-I00, User Manual

Search results

Summary of Contents for 5AP92D.1505-I00

Reviews:

Related manuals for 5AP92D.1505-I00

Brands by name

Popular brands