System overview
SDL4 Converter User's manual V 2.00 Translation of the original documentation
23
3.6.2.1.4 SDL4 Out interfaces
The SDL4 Out interfaces are female RJ45 connectors and operated with
SDL4 transmission technology.
Quantity and description
•
5COSD4.1000-00: 1 SDL4 output (SDL4 Out)
•
5COSD4.1001-00: 3 SDL4 outputs (SDL4 Out 0-2)
Information:
Hot plugging output devices on the interface for service purposes is supported by the hardware and
graphic drivers of approved operating systems. Recalibration may be required for touch screen de-
vices.
A maximum of 500 mating cycles are specified for this interface.
3.6.2.1.5 USB In interface
The USB In interface is a USB 2.0 type B interface that is used to transfer USB data. It must be connected to a
USB interface on the output device (e.g. B&R industrial PC) if DVI operation or SDL operation with a USB cable
was chosen as the transfer method.
For possible transfer methods, see section
"Connection options" on page 9
USB In interface
Standard
USB 2.0
Variant
Type B, female
Low speed (1.5 Mbit/s)
Full speed (12 Mbit/s)
Transfer rate
High speed (480 Mbit/s)
Cable length
Max. 5 m (without hub)
