Technical data
Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation
173
2.3.5.4 5ACCIF01.FPLS-000
2.3.5.4.1 General information
Interface option 5ACCIF01.FPLS-000 is equipped with a POWERLINK and RS232 interface. In addition, 32 kB
FRAM is installed.
•
1x POWERLINK interface managing or controlled node
•
1x RS232 interface
•
32 kB FRAM
•
Compatible with APC2100/PPC2100 and APC2200/PPC2200
2.3.5.4.2 Order data
Model number
Short description
Figure
Interface options
5ACCIF01.FPLS-000
Interface card - 1x RS232 interface - 1x POWERLINK interface
- 32 kB FRAM - For APC2100/PPC2100/APC2200/PPC2200 -
Only available with a new device
Optional accessories
Terminal blocks
0TB1210.3100
Connector 300 VDC - 10-pin female - Cage clamp terminal block
- Protected against vibration by the screw flange
Table 158: 5ACCIF01.FPLS-000 - Order data
2.3.5.4.3 Technical data
Information:
The following specified characteristic data, features and limit values are only valid for this accessory
and may differ from those of the complete system. The data specified for the complete system applies
to the complete system in which this accessory is installed, for example.
Model number
5ACCIF01.FPLS-000
General information
LED status indicators
L2, L3
B&R ID code
0xE540
Certifications
CE
Yes
UL
cULus E115267
Industrial control equipment
HazLoc
cULus HazLoc E180196
Industrial control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T4
1)
DNV GL
Temperature:
B
(0 - 55°C)
Humidity:
B
(up to 100%)
Vibration:
A
(0.7 g)
EMC:
B
(bridge and open deck)
2)
Controller
FRAM
Size
32 kB
Data retention
10 years
Read/Write endurance
Min. 10
12
times/byte
Remanent variables in power failure mode
32 kB
(for e.g. Automation Runtime, see Automation Help)
Interfaces
COM
Quantity
1
Type
RS232, modem supported, not galvanically isolated
Design
10-pin, male
UART
16550-compatible, 16 byte FIFO
Max. baud rate
115 kbit/s
POWERLINK
Quantity
1
Transfer
100BASE-TX
Type
Type 4
3)
Design
RJ45, shielded
Transfer rate
100 Mbit/s
Cable length
Max. 100 m between two stations (segment length)
Table 159: 5ACCIF01.FPLS-000 - Technical data
