Created: 1/22/2009, Revision:
B
7/29
/20
16
8200-066
E4-E5-E6 Tubular Folding Nose Assembly Instructions
Page 5 of 5
Front Mount Folding Nose
Velcro strap
mounting holes
3. Attach the folding nose (A) to the outside of the
brackets in the order shown: acorn nut (N), rod (F),
flat washer (O),
folding nose (A), conical washer
(P), bracket (B), spacer (G ), folding nose center,
spacer (G ), bracket (C), conical washer (P), folding
nose,
flat washer (O),
and acorn nut (N).
Tighten,
the folding nose should rotate up and
down freely.
4. Attach the lever latch (E) thru the farthest hole of
the folding nose with 1/4”-20 bolt (I) and 1/4”-20
lock nut (M). The latch should rotate freely.
6. Fold up the folding nose to the stored position. Based on
the height of the folding nose purchased, select a hole in the
frame to attach the Velcro strap.
7.
Pass the #10-24 bolt (J) thru the end of the Velcro (D), thru
the frame and secure with #10-24 nut (L). Then wrap the
Velcro around the folding nose, around the frame and back
on to itself, securing the folding nose in the stored position.
