Created: 1/22/2009, Revision: B 7/29/2016
8200-066
E4-E5-E6 Tubular Folding Nose Assembly Instructions
Page 3 of 5
3. Attach the folding nose (A) to the outside of the
brackets in the order shown: 5/16”-18 x 12” bolt
(H),
flat washers (M),
folding nose (A), flat
washer (M), bracket
(B), spacer (C ), folding nose
center, spacer (C ),
bracket (B), flat washer (M),
folding nose,
flat washer (M),
and
5/16”-18 lock
nut (J). Tighten, the folding nose
should rotate
up and down freely.
4. Attach the lever latch (E) thru the closest hole of
the folding nose with 1/4”-20 bolt (G) and 1/4”-20
lock nut (L). The latch should rotate freely.
5. Reassemble the wheels on the hand truck with the
removed fasteners.
Rear Mount Folding Nose
Velcro strap
mounting holes
6. Fold up the folding nose to the
stored position. Based on the
height of the folding nose
purchased, select a hole in the
frame to attach the Velcro strap.
7.
Pass the #10-24 bolt (I) thru the end
of the Velcro (D), thru the frame and
secure with #10-24 nut (K). Then
wrap the Velcro around the folding
nose, around the frame and back on
to itself, securing the folding nose in
the stored position.
