BandLuxe R300 Series, User Manual

Page: 6 / 65

Package Contents
5
7 Power Receptor Receptor for the Power Adaptor.
8 UMTS LED Reference below table.
9 Roaming LED Solid light shows the Router is connecting to
Roaming network.
10 WLAN LED Solid light indicates that the wireless segment is
ready.
Flashing light shows that data is being
transmitted via WLAN.
11 Ethernet LED Solid light shows that an Ethernet-enabled
computer is connected via the LAN port but no
data is being transmitted.
Flashing light shows that data is being
transmitted via LAN.
12 DIAG LED Reference below table.
13 Power LED Solid light indicates that the power supply is
connected properly.
14 3G Radio On/Off &
Signal Strength
Button Short press – Enable Signal Strength indication
for 3 sec.
Long press (>5 sec) – 3G radio on/off
15 3G Radio Signal
Strength Indicator Indicates the 3G signal strength when 3G Radio
button is in short press.
Table for UMTS and DIAG LED:
Operation status UMTS DIAG
Error in Router OFF Solid
Fail to boot module Solid Red Flashing
No SIM exist Flashing Red OFF
Waiting for PIN entering Flashing Red OFF
No network/Searching for network Flashing Red OFF
3G camped Flashing Green/Pink OFF
3G connected Solid Blue/Green/Pink OFF
Note: Pink for UMTS LED is available by product if 2G is available.