A/V SYSTEM CONTROLLER SPECIFICATIONS
5 years processor
1 year remote
Warranty:
See Limited Warranty
A/D & D/A, DSP & digital
receiver, IEEE1394
Upgradability:
10 pounds
Weight:
17"(w)x10"(d)x3.50"(h)
Dimensions:
Line -.5 Amp/250 Volt
Replacement fuses:
Motorola 24 Bit 120 MIPS
Dolby Digital/DTS DSP:
30 watts max
Power consumption:
24 Bit 32/44.1/48/96kHz
D/A Conversion
120/220/240 VAC
Line voltage:
24 Bit 48/96kHz
A/D Conversion
Miscellaneous
Processor Specifications
300 Ohms
Antenna Input Impedance:
75 Ohms
Antenna Input Impedance:
70 dB, A Weighted
Signal to Noise Ratio:
30 dB
Selectivity:
65 dB
Alternate Channel Selectivity:
28 dBf
Sensitivity:
15 / 35 dBf
Mono/Stereo Sensitivity:
12 dBf
IHF (Usable) Sensitivity:
2 dB
Capture Ratio:
28 dBf
Sensitivity:
20 Hz - 15 kHz, +1/ -3 dB
Frequency Response
Less than 0.3%
Total Harmonic Distortion:
Less than 0.25%
Total Harmonic Distortion:
520 - 1670 kHz
Frequency Range:
87.5 - 107.9 MHz
Frequency Range:
AM section
Tuner Specifications
FM Section
Tuner Specifications
6, 12 or 24 dB/Oct
Low Pass Crossover Slope
6 or 12 dB/Oct
High Pass Crossover Slope
Adjustable 20-200 Hz
High/Low Pass Crossover Fc
1
Component Video Outputs
1/1 (Zone 1), 0/1 (Zone 2)
Digital Outputs coax/optical
2
Component Video Inputs
6/5
Digital Inputs coax/optical
5.1 format
Multi Channel Input
5
SVHS Video Outputs
4
Audio Analog Outputs
7
SVHS Video Inputs
7
Audio Analog Inputs
5
Composite Video Outputs
8
Surround Outputs
7
Composite Video Inputs
46 mV
Noise Test Reference Level:
75 Ohms
Output Impedance:
221 Ohms
Output Impedance:
75 Ohms
Input Impedance:
50 k Ohms
Input Impedance:
98 dB CCIR 2 k Weighted
Signal to Noise Ratio:
2 V P-P
Maximum Output Level:
3 V rms
Maximum Output Level:
2 V P-P
Maximum Input Level:
2 V in, 1.5 V reference out
Input Sensitivity:
20 Hz - 10 MHz
±
3dB
Frequency Response:
5 Hz - 20 kHz,
+
0/
−
0.5dB
Frequency Response:
Video Specifications
Audio Specifications
Specifications subject to change without notice
77
p/n 12857 Rev. 0717A