Bandit INTIMIDATOR 12XPC, Operating & Parts Manual

Page: 130 / 153

BANDIT CONTROLS
2
245774458290 21Dec2016
Main Page
1 2 3 4 5
To Start, turn key to ON position. In
cold weather the engine may pre heat
glow plugs or heater grid and the WAIT
TO START symbol will appear on the
splash screen. When pre heat is
complete the Display will continue to
Main Page.
The control panel is equipped with an Anti-
Restart key switch to prevent grinding the
starter while the engine is running. If the
engine does not start immediately, it may be
necessary to cycle the key back to the OFF
position, wait 15-20sec (allow engine ECU
time to shut down), and then go through the
starting sequence again.
To turn off AutoFeed and run auxiliary
functions at startup, navigate to the
Mode page on the display and see
instructions below on pages 3 and 4.
The fuse box may have a foam retainer under
the cover to help hold the relays in place. The
fuse decal is located under the foam.