|
7
Zeus
3
|
QuickStart Guide - EN
TimePlot panels
Two predefined
layouts. Tap left/
right panel arrow
to switch between
layouts.
Autopilot
You can activate the autopilot from any panel.
1.
Press the Autopilot tile in the Instrument bar or the
WheelKey
when this is configured
for Autopilot control.
2.
Select the autopilot mode in the Autopilot pop-up.
S
Standby
Autopilot is passive. Used when manually steering at the helm
FU
Follow-up
Manual steering. The rudder angle is set by the
Rotary
knob or
by another FU unit
NFU
Non-Follow-
up
Manual steering. The rudder movement is controlled by the
Port
and
Starboard
buttons in the Pilot pop-up, or by another NFU
unit
A
Auto
Automatic steering, maintaining the set heading
N
D
NoDrift
Automatic steering, keeping the vessel on a straight bearing line
by compensating for drift
N
Navigation
Automatic steering, navigating the vessel to a specific waypoint
or through a route using GPS data
W
Wind *
Automatic steering, maintaining the set wind angle
* Only available if the boat type is set to Sailboat.
¼
Note:
You switch the autopilot to Standby mode from any automatic mode by a
short press on the
WheelKey
configured for Autopilot control.