B&G PT12060, Owner'S Manual, Page: 5 / 6

This symbol warns the user of dangerous voltage levels localized within the enclosure.
This symbol advises the user to read all accompanying literature for safe operation of the unit.
Read and follow all instructions, heed all warnings.
•
Connect the power supply cord only to an earth grounded ac receptacle according to the voltage
and frequency ratings.
•
Unplug the power supply cord before cleaning the unit exterior (clean only with a dry cloth).
Wait until completely dry before powering it again.
•
Warning: to prevent damage, fire or shock hazard, do not use this apparatus near water or
expose the amplifier to moisture.
•
Do not block any ventilation openings to allow for proper ventilation and cooling of the
amplifier. Try to maintain at least 6 inches of air space around the amplifier.
•
Do not install near any heat sources such as radiators, stoves, or any other devices that produce heat.
•
This product may be equipped with a polarized plug (one blade wider than the other). This is a
safety feature. If you are unable to insert the plug into the outlet, contact an electrician to replace
your obsolete outlet. Do not defeat the safety purpose of this plug.
•
Protect the power cord from being stepped on or harmed in any way.
•
The power supply cord of this product should be unplugged from the outlet when left unused for a
long period of time, or during electrical storms. Unplug this apparatus during lightning storms or when
unused for long periods of time. Only use the attachments/accessories specified by the manufacturer.
•
All servicing must be done by qualified service personnel. Servicing is required when the device
has been damaged, damages such as power-supply or cord/plug damage, liquid spills etc, in cases
of exposure to rain or moisture.
•
Do not place liquid-filled containers on the unit.
•
Caution: Do not remove covers. No user serviceable parts inside
•
This device is capable of producing very high sound pressure levels which may cause temporary
or permanent hearing damage. Use care when setting and adjusting volume levels during use.
•
Hazardous voltages may be present within the cabinet even when the power switch is off and the
power cord is connected. Therefore, disconnect the power cord from the obsolete outlet before servicing.
•
Keep these instructions for future use.
B&G GUITARS warrants that the B&G Prototype
™
amplifier you have purchased shall be free of
any defects in parts and workmanship if used under normal operating conditions for a period of
three (3) years from the date of purchase or initial lease, including speakers, cabinets, handles and
cabinet hardware. Vacuum tubes are warranted for a period of ninety (90) days from the date of
purchase or initial lease.
WHAT IS NOT COVERED
•
Damage caused by negligence, abuse, modification, improper use, incorrect voltages, incorrect
polarity, or the use of power supplies not recommended by the manufacturer.
•
Damage caused by another product.
•
General wear and tear.
•
Damage caused during transportation of the product.
•
Damage caused by repair or service carried out by persons not authorized by B&G GUITARS.
•
A product with a serial number which has been defaced, removed etc.
•
A product which was not purchased from an authorized dealer.
This Limited Warranty applies only to the original retail purchaser.
IMPORTANT: PLEASE RETAIN YOUR ORIGINAL SALES RECEIPT,
AS IT IS YOUR PROOF OF PURCHASE VALIDATING THIS LIMITED WARRANTY
warranty