B&G PT12060, Owner'S Manual, Page: 4 / 6

Your new B&G amplifier comes equipped with the highest quality tubes available,
sourced from various manufacturers all over the world. Because of occasional
irregularities in supply, the specific tube type used in each amplifier is subject to
change without notice. When replacing output tubes, please note the specific tube
markings on the original tubes supplied with your amplifier. For example, 6V6
output tube types used by B&G include, but are not limited to: 6V6GT; 6V6GTM;
6V6C; 6V6GE, etc. The installation of a different type is recommended to be made
by a qualified technician.
If you have questions or concerns, contact us or your local B&G GUITARS dealer.
"Prototype
™
" model tube locations left to right at rear
vacuum tubes
rear panel
L.
M.
Plug-in connection for the 4
Ω
internal speakers. A speaker must
always be connected to this jack when the amplifier is ON. A speaker/s impedance load
of 4
Ω
should be used to avoid distortion or damage to the amplifier.
POWER CORD SOCKET - Connect to a grounded A/C outlet using the supplied power
cord, in accordance with the voltage and frequency ratings specified on the rear panel
of your amplifier. FUSE - Protects the amplifier from electrical faults. Replace a blown
fuse only with the type and rating specified on the rear panel of your amplifier.