PW-100
V5
8
AUTOMATIC FEEDBACK CONTROL (
AFC
)
If acoustic feedback would occur while
PTT
or
INTER
are on (caused, for instance, by the
opening of a door or window), the equipment will detect and automatically fix the issue
by decreasing the volume. After the event takes place, the equipment will attempt to rise
the volume back to the level defined by the user, as long as
AFC
is not triggered again.
ENERGY SAVING FEATURES (Automatic Shut Down,
ASD
)
Partial Shut Down (PSD)
The equipment constantly tracks the incoming voltage status. If the incoming voltage is
below 12.6VDC, after 20 seconds of inactivity the equipment activates
PSD
mode. This
change is indicated by the turning off the keyboard’s backlights. While on
PSD
mode,
upon pressing any key the respective function will execute normally and the equipment
will return to normal energy consumption mode.
Total Shut Down (TSD)
If the incoming voltage is below 11.5 VDC, after 60 seconds the equipment will
automatically shut down any function and auxiliary load. While on
TSD
, upon pressing
any key the backlights will blink 3 times and the function controlled by the pressed key
will not execute.
Once the equipment detects that the incoming voltage exceeds 12.5VDC again, the
equipment will return to its normal operation.
TECHNICAL SPECIFICATIONS
DIMENSIONS
Electronic Unit
37 x 109 x 198 mm
1.5’’ x 4.3’’ x 7.8’’
Loudspeaker
133 x 204 x 155 mm
5.2’’ x 8.0’’ x 6.1’’
Digital Keyboard
25 x 7 x 5.4 mm
1.0’’ x 0.3’’ x 2.1’’
Internal Speaker
80 x 56 x 95 mm
3.2’’ x 2.2’’ x 3.7’’
INPUT VOLTAGE
12 - 14.9 VDC
INPUT CURRENT
6.8 Amps @ 13.6 VDC (100W Loudspeaker)
STAND BY CURRENT <25 mA
AUDIO FREQUENCY
330Hz - 5600 kHz
OUTPUT POWER
93W RMS - 8 Ohm
SIREN FREQUENCY
440 - 1750 Hz
LOW VOLTAGE
SHUTDOWN
If voltage drops below 11.5 V for 60 seconds or longer, the equipment will
cease to work and resume operation when system voltage exceeds 12.5V
B&G ELECTRONICS
ONE YEAR LIMITED WARRANTY
B&G Electronics guarantees that this product leaves the factory free from defects related to materials
and manufacturing. If for any reason a failure related to materials and manufacturing were to occur
during the period of one year after the date of purchase, B&G Electronics would repair or replace the
failing equipment free of charge.
This warranty shall be voided if the product is modified, tampered with, misused, or subjected to
abnormal working conditions. This warranty does not cover physical damage to the product surface.
This warranty does not apply when the malfunction results from the use of this product in conjunction
with accessories, other products, or peripheral equipment not designed by B&G Electronics.
