PW-100
V5
PW-100
V5
6
7
SETTING UP FUNCTIONS
Setting up
HORN
tone
The default tone is
Standard HORN
, although the equipment allows to choose between
Standard HORN
and
B&G HORN
, as explained below.
1. Press and hold
HORN
.
2. While
HORN
is held, press and hold
SIREN
(3 s) until the tone changes.
3. To change tone again, repeat steps
1 & 2.
Setting up
SIREN
SIREN
function allows to choose among 4 different tones: WAIL, Hi-Lo, PHASER & YELP.
1. Press and hold
SIREN
(5 s) until the
siren sound briefly pauses.
2. Press
HORN
to choose among tones. 3. Press
SIREN
to finish setup.
Setting up
AUX
AUX
allows to either play an auxiliary siren tone, or change the activation state of an
auxiliary load up to 15 Amp (useful to manage a light set or other devices).
1. Press and hold
AUX
(5 s).
If it beeps once, it’s set to
AUX LOAD.
If siren stops & restarts, it’s set to
AUX
SIREN.
2. Press
SIREN
to switch among
AUX
LOAD
and
AUX SIREN.
If it beeps once, it’s set to
AUX LOAD.
If siren stops & restarts, it’s set to
AUX
SIREN.
3. Press
AUX
to finish setup.
Upon finishing beeps twice.
Setting up
AUX SIREN
tone
With
AUX
set to
AUX SIREN
, it is possible to select the
AUX SIREN
tone to one of the
available tones (WAIL, Hi-Lo, PHASER or YELP).
It is not possible to set the same tone for both
SIREN
and
AUX SIREN
, meaning that while
setting
AUX SIREN
, the
SIREN
tone in use will be unavailable; also, if the
AUX SIREN
tone
is selected for
SIREN
,
AUX SIREN’s
tone will automatically change.
1. Press and hold
AUX
(5 s) until the
siren sound briefly pauses.
2. Press
HORN
to switch among the
available tones.
3. Press
AUX
to finish setup.
Setting up
AUX LOAD
With
AUX
set to
AUX LOAD
, it is possible to set
AUX LOAD
in a way that it gets activated
together with
SIREN
(for instance, that when
SIREN
sounds, a light set associated to
AUX
LOAD
turns on)*, in addition to the activation by pressing
AUX
.
1. Press and hold
AUX
(5 s) until you
hear 1 beep.
2. Press
HORN
to switch
AUX LOAD
mode.
If it beeps once, it’s set to independent.
It it beeps twice, it turns on with
SIREN
.
3. Press
AUX
to finish setup.
Setting the volume of the internal speaker, “internal volume”
1. While
INTER
is on, press and hold
INTER
.
2. While
INTER
is held, press
WAIL
to
increase volume.
3. While
INTER
is held, press
HORN
to
decrease volume.
Setting the volume of the external loudspeaker, “external volume”
1. Press and hold
PTT
.
2. While
PTT
is held, press WAIL to
increase volume.
3. While
PTT
is held, press
HORN
to
decrease volume.
External Volume Auto-Adjustment (VAA)
In addition to the manual adjustment, the equipment is capable of detecting the vehicle’s
level of acoustic isolation and adjust the maximum external volume accordingly.
To perform this procedure, close all of the vehicle’s doors and windows, and follow the
steps explained below.
To cancel the procedure, press
PTT.
1. Press and hold
PPT
.
Remain silent during the procedure.
2. While
PTT
is held, press
INTER
.
Release both upon hearing a beep.
3. Wait up to 30 s, the equipment will
beep 2 times when
VAA
has finalized.
Enabling
Hidden Siren
Function
The equipment allows to
silence
the siren sounds, meaning that when this function has
been enabled and activated, the pressing of any of the siren buttons (
SIREN, WAIL, HORN,
AUX SIREN
) will not yield a response.
1. To switch between both states, press simultaneously
WAIL, HORN, AUX, SIREN
, and hold for 5 s.
2. If it beeps 1 time,
Hidden Siren
is enabled.
If it beeps 2 times,
Hidden Siren
is disabled.
Activating / Deactivating
Hidden Siren
Once
Hidden Siren
has been enabled, it is possible to activate it to effectively silent all
sirens, and deactivate to return all sirens to normal function.
1. To activate
Hidden Siren
, press and
hold
INTER
.
2. While
INTER
is held, press and hold
PTT
until keyboard’s backlights blink.
3. Sirens will now be silenced.
1. To deactivate
Hidden Siren
, simultaneously press and hold
WAIL
and
HORN
until keyboard’s backlights blink.
2. Sirens will now sound.
